(045) 283-606
Investing in high-quality flooring is just the first step—keeping it looking great for years requires proper care and maintenance. Whether you’ve installed carpet, vinyl planks, hybrid, laminate, timber, or bamboo flooring, these expert tips will help you extend the life and beauty of your floors.
Clean Regularly: Vacuum, sweep, or dry mop floors weekly to remove dirt and dust that can cause scratches.
Use Doormats: Place doormats at entrances to minimize dirt, moisture, and debris from being tracked inside.
Avoid Harsh Cleaners: Use pH-neutral cleaners recommended for your specific flooring type.
Furniture Pads: Place pads under furniture legs to prevent scratches and dents.
Protect from Sunlight: Use blinds or curtains to reduce fading from UV exposure.
Vacuum Weekly: Use a high-suction vacuum with a rotating brush.
Spot Cleaning: Blot spills immediately with a clean cloth—never rub.
Professional Cleaning: Schedule deep cleaning every 12–18 months.
Rotate Furniture: Shift heavy furniture occasionally to avoid permanent indentations.
Damp Mopping: Use a damp (not soaking wet) microfiber mop with vinyl-safe floor cleaner.
Avoid Abrasives: Never use steel wool, harsh brushes, or bleach.
Keep Dry: Wipe up spills immediately to prevent moisture from seeping into joints.
Protective Covers: Use rugs in high-traffic areas to reduce wear.
Dry Cleaning: Use a dry dust mop or vacuum with a soft brush head.
No Wet Mops: Excess moisture can damage the laminate core.
Edge Sealing: Make sure edges are properly sealed to avoid water damage.
Clean with Care: Use cleaners labeled specifically for laminate flooring.
Sweep Daily: Use a soft-bristle broom or vacuum with hardwood setting.
Avoid Water: Clean with a slightly damp cloth; never let water pool on the surface.
Re-oil or Recoat: Depending on your timber type, recoating every few years helps maintain finish.
Humidity Control: Maintain a consistent indoor climate to prevent wood from expanding or shrinking.
Gentle Vacuuming: Use a vacuum with no beater bar to avoid scratching.
Dry to Damp Mop: Clean with a lightly damp mop and bamboo-safe cleaner.
UV Protection: Use blinds to reduce fading from direct sunlight.
Avoid Standing Water: Wipe up any spills immediately to avoid swelling.
❌ Steam Cleaners: These are too harsh for most flooring types and can damage the surface or adhesive.
❌ Ignoring Spills: Letting spills sit can cause stains, warping, or mold growth.
❌ Dragging Furniture: Always lift, don’t drag—this prevents scratches and gouges.
❌ Using Vinegar or Ammonia: These can dull finishes and damage protective coatings.
Use area rugs in high-use zones like entryways and under dining tables.
Place felt pads under chair and table legs.
Install window films or blinds to block UV rays and reduce heat exposure.
For households with pets, trim claws regularly to avoid scratches.
1 raily close ngunnawal ACT 2913
carpetengineers@gmail.com (045) 283-606
Mon-Fri: 8.00am - 5.00pm Sunday Closed
At Carpet Engineer, we supply and install a wide range of flooring solutions for residential, commercial, and industrial spaces.
Copyright © 2024 . All Rights Reserved